Reef Builders - The Source for Reef Keeping Information

Just built this tonight. Simple as it gets, basically just a 12 inch long piece of 3 inch PVC, a couple end caps ( one removeable ), a couple nipples one in each end, filters to keep the carbon in, and some carbon. Was thinking we could do these as a real simple DIY at an upcoming meeting. The parts could be supplied at cost and plenty of assistance as needed to get it together.

Here's a pic of the parts



Temp mount in the sump, but could be mounted any where.



and the effluent

__________________
(' )< David >( ')

"The world is headed for mutiny when all we want is unity" Scott Stapp, Creed

Great DIY Dave. A simple yet effective and use the same idea for phosphate and nitrate media as well.

__________________
¸,ø¤º°`°º¤ø*-Leroy-¸,ø¤º°`°º¤ø*
---------------------------------------
1930's/1950's Matchcover Collector
http://www.matchcover.org/
A collection of advertising art
•._.•´¯`•._.•´¯`•._.•´¯`•._.•
90 Gallon, Softies, LPS, SPS
90 Gallon FOWLR

Is this pretty much the DIY we were going to do last year?

Could be good timing to try this since we're setting up a new sump for the 180

Thats pretty much it or atleast how I envisioned it. I think Rob had some other ideas to incorporate as well. Trying to get the ball rolling. Waiting to hear from Rob.

__________________
(' )< David >( ')

"The world is headed for mutiny when all we want is unity" Scott Stapp, Creed